hohner

    Hohner Automation Ltd.
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series LPX incremental encoder for up to 50mm

click for non-intrinsically safe version

L

 

P

X

X

-

1

3

X

R

-

X

X

X

X
 

Shaft Size

 

|

 

Resolution - ppr

C1 = 2"

     Connection

40 = 40 mm

1 = 2m cable

50 = 50 mm

2 = 5m cable

 

5...24 Volt Extended Line Driver is standard, optional Current Sink Open Collector is available

 

    IECEx

Zone 0, Class 1 Div 1
Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable 2 meters Wire Colour
-   4 ...+ 140 degrees F PS GND Black
Max frequency: 50 kHz PS 24 Volts Red
Power Supply: 5...24 Volts Output A White
Weight: 53 oz (1.5 kg) Output B Blue
Protection: IP 66M, NEMA 4 Output O Yellow
Housing: Aluminum Output A inv Green
Shaft: Stainless Steel Output B inv Violet
Bearings: 2 x 61811 Output O inv Brown
Torque: 220 oz/in (150 N-cm) Output
Shaft load: Supports its own weight Diagram is shown counter clockwise
Humidity: Up to 98% permissible
Speed:  2000 RPM max.
Max. ppr 5000
 
 
 
 
 
Certifications
To use the encoder in a hazardous area, a safety barrier or galvanic isolator has to be used.  Our six channel barrier and isolator work with our encoders.  Isolator Data Sheet
IP 66M
ATEX  [Certificate]
IECEx  [Certificate]
CSA [Certificate]
GOST-CU [Certificate]
 
Mounting Instructions

Slide encoder onto shaft.  To keep encoder from rotating: have a pin to prevent rotation in one of the mounting holes, or a bracket bolted onto the mounting holes, or simply tie wrap the cable.  Whatever is done, ensure there is a bit of play between encoder and mounting arrangement to prevent bearing damage.  Hook up the encoder with the connections as described.  Make sure power supply meets specifications.
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk