hohner

    Hohner Automation Ltd.
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series NAMFPX absolute (special threaded shafts) up to H7 - 4...20 mA output

N

A

M

F

P

X

   X X A G G   G / 0 X X X

Shaft Size

    

Resolution - bits
H1 = 1" UNS

360 = 1 ramp per turn
H2 = 3/4" BSP 180 = 2 ramps per turn
H3 = 5/8" BSP 090 = 4 ramps per turn
H4 = 1 - 1/4" x 14 tpi (16mm bore)  
H5 = 5/8" x 18 UNF  
H6 = 1 1/4" x 14 tpi (25mm bore)  
H7 = 3/4" UNC  

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable 2 meters
-   4 ...+ 140 degrees F  - Loop Cable Wire # 1
Max frequency: 5 kHz  + Loop Cable Wire '# 2
Weight: 53 oz (1.5 kg)
Protection: IP 66M, NEMA 4 Output
Housing: Aluminum Diagram is shown clockwise
Shaft: Stainless Steel
Bearings: 2 x 6807 ZZ
Torque: 0.8 oz/in (6 N-cm)
Shaft load: Supports its own weight
Humidity: Up to 98% permissible
Speed:  2000 RPM max.
Max. bits: 8 bit
 
 
 
 
 
Certifications
Best suited to work with the following isolators: MTL5541
IP 66M
ATEX  [Certificate]
IECEx  [Certificate]
 
Mounting Instructions
Clamp encoder to shaft and use torque arm to prevent rotation.  Hook up the encoder with the connection as described.  Make sure power supply meets specifications
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk