|
|
|
|
Series CSMXE shaft encoder with 4...20mA output |
 |
M | X | X | X | - | X | X | X | X | - | 0 | X | X | X | |||||||||||
| | | |____| | Output | | | | |
|
Resolution |
|||||||||||||||||||
| | | | | 06 = 2 wire | | | | | 090 = 90 degrees | ||||||||||||||||||||
|
|
| | | | 34 = 3 wire | | | | | 180 = 180 degrees | |||||||||||||||||||
| | |
Shaft Size |
| | | | 360 = 360 degrees | |||||||||||||||||||||
| | | K5 = 12 x 20 mm | | | | | degrees per ramp (turn) | |||||||||||||||||||||
| | | | |
Exit |
|||||||||||||||||||||||
| | | | | A = Axial | |||||||||||||||||||||||
| | | | | R = Radial | |||||||||||||||||||||||
|
Protection |
Connection | ||||||||||||||||||||||||
| E = IP66/67 Stainless Steel | 3 = 10 m cable | ||||||||||||||||||||||||
| F = IP66/67 Aluminum | 5 = 20 m cable | ||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
Please call +44 1978 363 888 in Europe or 1 800 295 5693 in North America or email us for pricing & delivery |
| Technical Data | Connection Options | |||
| Operating temp: | - 20 ...+ 60 degrees C | 2 wire version | ||
| - 4 ...+ 140 degrees F | + Loop | Orange | ||
| - Loop | Black | |||
| Current consumption: | 80 mA (max.) | |||
| Power supply: | 24V | 3 wire version | ||
| Weight: | 1.5Kg to 2.5Kg | PS GND | Black | |
| Housing: | Aluminum or S. Steel | PS +24 Volts | Red | |
| Shaft: | Stainless Steel | Output 4...20 mA | White | |
| Bearings: | 2 x 6001 RSH | |||
| Torque: | 0.4 oz/in (3 N-cm) | Output | ||
| Humidity: | Up to 98% permissible | Count will increment in CW direction. | ||
| Speed: | 3000 RPM max. |
 |
||
| Shaft load: | Radial / Axial 10 N | |||
| Certifications |
| Does not require a barrier for use in hazardous areas, it is EEx d IIC, making the barrier redundant. |
| IP 66/X8 |
| EEx d II C: |
| SIRA 05ATEX1280 |
| IECEX SIR 05.0059 |
| Mounting Instructions |
| To mount
encoder on machine: Option 1 is to mount with three screws, option 2
is to use synchroflange mounting brackets. Hook up the encoder with the connections as described. Make sure
power supply meets specifications. Attach encoder to mounting
bracket as shown. Attach shaft using a flexible coupling.
|
| Dimensions |
|
|
| Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 |
| Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
| Wrexham LL13 8UG | E-mail: uksales@hohner.com |
| United Kingdom | Web: www.hohneronline.co.uk |
