hohner

    Hohner Automation Ltd.
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series CMDXE (MU) stainless steel absolute 4...20mA multiturn shaft encoder
M   U K 1 - 4 0 X X - X X X X
    Shaft Size   |   |

    

Resolution

K1 = 12 X 25 mm

 | | 0309 = 8 turns

| | 0408 = 16 turns
Connection | 0507 = 32 turns
3 = 10 m cable | 0606 = 64 turns
4 = 15 m cable

Exit

P = Axial

T = Radial

 

Zone 1, Class 1 Div 1
Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable
-   4 ...+ 140 degrees F PS GND Black
On request: -20 ... + 100 degrees C PS +  24 V Red
Current consumption: 80 mA (max.) Output 4...20 mA White
Power supply: 24V
Weight:    6 Kg Output
Housing: Stainless Steel Count will increment in CW direction.
Shaft: Stainless Steel

*4...20mA span based on 250 ohm load
Bearings: 2 x 6001 ZZ
Torque: 0.4 oz/in (3 N-cm)
Humidity: Up to 98% permissible
Speed: 300 RPM max.
Shaft load: Radial / Axial 10 N
Certifications
Does not require a barrier for use in hazardous areas, it is Flameproof, making the barrier redundant.
IP 66/X7
ATEX [Certificate]
IECEx [Certificate]
CSA [Certificate]
GOST-CU [Certificate]
 
Mounting Instructions
To mount encoder on machine:  Option 1 is to mount with three screws, option 2 is to use synchroflange mounting brackets.  Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk