|
hohner |
Hohner Automation Ltd. |
| Home | Distributors | Terms | About Us | Accessories | Download 3D AutoCAD |
|
Series 32 submersible multi-turn shaft encoder with 4...20mA output |
![]() Do not run the encoder when not submersed, as this will damage the seal. Only use this encoder for applications that require full submersion, 100% of the time. |
3 | 2 | 1 | 2 | - | 4 | 0 | X | X | - | X | X | X | X | |||||||||||
| Shaft Size |
|___| |
|
Resolution |
||||||||||||||||||||||
| 12 = 12 mm | | | 0309 = 8 turns | |||||||||||||||||||||||
|
Connection |
0408 = 16 turns | ||||||||||||||||||||||||
| 03 = 2 m (6 ft) cable | 0507 = 32 turns | ||||||||||||||||||||||||
| 05 = 5 m (15 ft) cable | 0606 = 64 turns | ||||||||||||||||||||||||
| 12 = 12 m (36 ft) cable | 0705 = 128 turns | ||||||||||||||||||||||||
| 68 = 68 m (200 ft) cable | 0804 = 256 turns | ||||||||||||||||||||||||
| 0903 = 512 turns | |||||||||||||||||||||||||
| Submersible to 2.5 bar | |||||||||||||||||||||||||
| Burrgmann seal MG1 / 12-G6 | |||||||||||||||||||||||||
| Longer cable is available upon request | |||||||||||||||||||||||||
| Technical Data | Connection Options | |||
| Operating temp: | + 00 ...+ 60 degrees C | Cable | ||
| + 32 ...+ 140 degrees F | PS GND | Black | ||
| PS + 24 V | Brown | |||
| Output 4...20 mA | Light grey | |||
| Current consumption: | 80 mA (max.) | |||
| Power supply: | 24V | Output | ||
| Weight: | 70.5 oz (2.0 kg) | Count will increment in CW direction. | ||
| Housing: | Stainless Steel |
![]() |
||
| Shaft: | Stainless Steel | |||
| Bearings: | 2 x 6001 ZZ | |||
| Torque: | 0.4 oz/in (3 N-cm) | |||
| Humidity: | Up to 98% permissible | |||
| Speed: | 500 RPM max. | |||
| Shaft load: | Radial / Axial 10 N | |||
| Pressure: (Series 32) | 2.5 bar - IP 66 / 68 | |||
| Seal: | Burrgmann: | |||
| MG1 / 12-G6 | ||||
| Certifications |
| IP 66M / X8 [Certificate] PDF File |
| Mounting Instructions |
| To mount
encoder on machine: Option 1 is to mount with three screws, option 2
is to use synchroflange mounting brackets. Hook up the encoder with the connections as described. Make sure
power supply meets specifications. Attach encoder to mounting
bracket as shown. Attach shaft using a flexible coupling.
|
| Dimensions |
|
|
| Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 |
| Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
| Wrexham LL13 8UG | E-mail: uksales@hohner.com |
| United Kingdom | Web: www.hohneronline.co.uk |