|
|
|
|
Series 03 absolute multi-turn analog encoder - 4 ... 20 mA output |
 |
0 | 3 | 1 | 0 | - | 4 | 0 | 0 | 7 | - | X | X | X | X | ||||||||||
|
Shaft |
Connection |
Resolution - turns |
||||||||||||||||||||||
|
10 = 10 mm |
07 = 4 pin | 0507 = 32 turns | ||||||||||||||||||||||
| 0804 = 256 turns | ||||||||||||||||||||||||
| . | ||||||||||||||||||||||||
| . | ||||||||||||||||||||||||
| . | ||||||||||||||||||||||||
| . | ||||||||||||||||||||||||
| . | ||||||||||||||||||||||||
| Technical Data | Connection Options | ||||
| Operating temp: | - 20 ...+ 60 degrees C | 3 + S connector | |||
| - 4 ...+ 140 degrees F | PS GND | 1 |  |
||
| On request: | -20 ... + 100 degrees C | PS 24 V | 2 | ||
| Power supply: | 24V | Output 4 ... 20 mA | 3 | ||
| Current | Shield | ||||
| consumption: | 100 mA (max.) | Output | |||
| Weight: | 20 oz (0.6 kg) | Count will increase in CW direction. Precision 0.05% | |||
| Protection: | IP 55 NEMA 3 |  |
|||
| Housing: | Stainless Steel | ||||
| Shaft: | Stainless Steel | ||||
| Bearings: | 2 x 6001 ZZ | ||||
| Torque: | 0.4 oz/in (3 N-cm) | ||||
| Humidity: | Up to 98% permissible | ||||
| Speed: | 300 RPM max. | ||||
| Shock: | 10g (6msec) | ||||
| Vibration: | 5g (500 Hz) | ||||
| Shaft load: | Radial / Axial max 10 lbs | ||||
| Mounting Instructions |
To mount
encoder on machine: Option 1 is to mount with three screws, option 2
is to use synchroflange mounting brackets. Hook up the encoder with the connections as described. Make sure
power supply meets specifications. Attach encoder to mounting
bracket as shown. Attach shaft using a flexible coupling.
|
| Dimensions |
|
|
| Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 |
| Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
| Wrexham LL13 8UG | E-mail: uksales@hohner.com |
| United Kingdom | Web: www.hohneronline.co.uk |
