hohner

    Hohner Automation Ltd.
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series W incremental shaft encoder up to 12 mm

(non intrinsically safe part number)

 
W X X X X X / X X / X X X X
| | | | | |_______| R  E  S  O  L  U  T  I  O  N
Output Signal | | | | | Up to 5000 ppr max

Shaft Size | | | Mechanical Build
Output Circuit |

Connection Exit
Connection

 
X

Output Signal

 X Shaft Size

1 = channel A

 A = 6 x 20 mm IP54
2 = channel A and O B = 8 x 20 mm IP65
3 = channel A and B C = 10 x 20 mm IP54
4 = channel A, B and O D = 12 x 20 mm IP54
5 = channel A and A comp E = 1/4" x 20 mm IP65
6 = channel A & O and A & O comp F = 3/8" x 20 mm IP54
7 = channel A & B and A & B comp G = 6 x 20 mm IP65
8 = all six channels K = 12 x 20 mm IP65
X Output Circuit X Connection
1 = TTL Line Driver 0 = 5 m cable
2 = CMOS Line Driver 7-15 Volts 1 = 2 m cable
3 = Current Sink 7-30 Volts 2 = 9412 (4 pin) plug
4 = Current Source 7-30 Volts 3 = 9414 (5 pin) plug
5 = Push Pull 11-30 Volts 4 = 9512 (12 pin) plug
6 = Non Existant 5 = 9415 (small 12 pin) plug
7 = Current Sink / Open Collector 8 = 9418 (8 pin) plug
8 = Current Source / Open Collector A = 6 pin MS
9 = Extended Line Driver 5-24 Volts B = 7 pin MS
X = 5 Volt Regulator Fitted K = 3 m cable
T = 8 Volt Regulator Fitted L = 4 m cable
Y = 12 Volt Regulator Fitted M = 8 m cable
Z = 15 Volt Regulator Fitted N = 10 m cable
X Connection Exit XX Mechanical Build
A = Axial Exit BA = IP65
R = Radial Exit AO = IP54
Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable 12 pin
-   4 ...+ 140 degrees F PS GND Black 1
On request: - 40 degrees PS 5 ... 24 V Red 2
Max frequency: 150 kHz Output A White 3
Current consumption: 90 mA (max.) Output B Blue 4
Power supply: 5 - 24V Output O Yellow 5
Weight:    21 oz (0.6 kg) Output A inv Green 6
Protection: IP 65 or 54 Output B inv Violet 7
Housing: Aluminum Output O inv Brown 8
Shaft: Stainless Steel
Bearings: 2 x 6001 - (Z) (RS) Output
Torque: 0.7 oz/in (5 N-cm) Diagram is shown with clockwise shaft rotation viewed from 
Humidity: Up to 98% permissible

shaft end
Speed:  6000 RPM max.
Shock: 10g (6msec)
Vibration: 5g (500 Hz)
Shaft load: Radial / Axial 10 N
Line driver output max: 50 mA per channel
Max. ppr 5000
Inertia: 100 gm-cm2
Mounting Instructions
Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk