hohner

    Hohner Automation Ltd.
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series 3000 incremental heavy duty shaft encoder

(non intrinsically safe part number)

 
X X X X / X X X X / X X X X
|______| | | | | |_______| R  E  S  O  L  U  T  I  O  N

Output Signal

 | | Shaft Size | Mechanical Build Up to 5000 ppr max

Connection | |
Output Circuit Connection Exit

 
XX

Output Signal

30 = channel A
31 = channel A and A comp
32 = channel A and O
33 = channel A & O and A & O comp
40 = channel A and B
41 = channel A & B and A & B comp
42 = channel A, B and O
43 = all six channels
 
X Connection X Output Circuit
0 = 2 m cable 0 = Current Sink 7-30 Volts
1 = 5 m cable 1 = Push Pull 11-30 Volts
2 = 9412 (4 pin) plug 2 = TTL Line Driver
3 = 9414 (5 pin) plug 3 = Non Existant
4 = 9512 (12 pin) plug 4 = CMOS Line Driver 7-15 Volts
5 = 9415 (small 12 pin) plug 5 = Current Source 7-30 Volts
8 = 9418 (8 pin) plug 6 = Non Existant
A = 6 pin MS 7 = Current Sink / Open Collector
B = 7 pin MS 8 = Current Source / Open Collector
K = 3 m cable 9 = Extended Line Driver 5-24 Volts
L = 4 m cable X = 5 Volt Regulator Fitted
M = 8 m cable Y = 12 Volt Regulator Fitted
N = 10 m cable W = 15 Volt Regulator Fitted
 
X Shaft Size
O = 12 x 25 mm
E = 11 x 33 mm
 
X Connection Exit XX Mechanical Build
A = Axial Exit AO = IP54
R = Radial Exit BA = IP65
Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable 12 pin 4 pin
-   4 ...+ 140 degrees F PS GND Black 1 1
On request: -20 ... + 100 degrees C PS 5 ... 24 V Red 2 2
Max frequency: 150 kHz Output A White 3 3
Current consumption: 90 mA (max.) Output B Blue 4 *4
Power supply: 5 - 24V Output O Yellow 5 *4
Weight:    42 oz (1.2 kg) Output A inv Green 6 *depends if
Protection: IP 65, NEMA 4 Output B inv Violet 7  encoder has
Housing: Aluminum Output O inv Brown 8  'O' or 'B'
Shaft: Stainless Steel  channel
Bearings: 2 x 6001 - (Z) (RS) Output
Torque: 0.7 oz/in (5 N-cm) Diagram is shown with clockwise shaft rotation viewed from 
Humidity: Up to 98% permissible

shaft end
Speed:  6000 RPM max.
Shock: 10g (6msec)
Vibration: 5g (500 Hz)
Shaft load: Radial / Axial 10 N
Line driver output max: 50 mA per channel
Max. ppr 5000
Inertia: 30 gm-cm2
Mounting Instructions
Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk