hohner

    Hohner Automation Ltd.


Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series IP 3000 incremental heavy duty shaft encoder

(non intrinsically safe part number)

 

(aluminum shown)


 

IP X X X X X X X X / X X X X
|___| | | | | |_______| R  E  S  O  L  U  T  I  O  N

Output Signal

| | Shaft Size | Mechanical Build Up to 5000 ppr max

Connection | |
Output Circuit Connection Exit

 

XX

Output Signal

R E S O L U T I O N

30 = channel A

Up to 5000 ppr max

31 = channel A and A comp
32 = channel A and O
33 = channel A & O and A & O comp
40 = channel A and B
41 = channel A & B and A & B comp
42 = channel A, B and O
43 = all six channels
 
X Connection X Output Circuit
0 = 2 m cable 0 = Current Sink 7-30 Volts
1 = 5 m cable 1 = Push Pull 11-30 Volts
2 = 3 m cable 2 = TTL Line Driver
3 = 4 m cable 3 = Non Existant
4 = 8 m cable 4 = CMOS Line Driver 7-15 Volts
5 = 10 m cable 5 = Current Source 7-30 Volts
8 = 25 m cable 6 = Non Existant
7 = Current Sink / Open Collector
X Shaft Size 8 = Current Source / Open Collector
O = 12 x 25 mm 9 = Extended Line Driver 5-24 Volts
A = 12 x 25 mm gated with A X = 5 Volt Regulator Fitted
G = 12 x 25 mm gated with A & B Y = 12 Volt Regulator Fitted
E = 11 x 33 mm W = 15 Volt Regulator Fitted
 
X Connection Exit XX Mechanical Build
A = Axial Exit NB = IP66 Aluminum
R = Radial Exit SB = IP66 Stainless Steel

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Cable
-   4 ...+ 140 degrees F PS GND Black
On request: -20 ... + 100 degrees C PS 5 ... 24 V Red
Max frequency: 150 kHz Output A White
Current consumption: 90 mA (max.) Output B Blue
Power supply: 5 - 24V Output O Yellow
Weight: 42 oz (1.2 kg) Al Output A inv Green
125 oz (3.5 kg) SS Output B inv Violet
Protection: IP 66/67 Output O inv Brown
Housing: Aluminum or SS
Shaft: Stainless Steel  Output
Bearings: 2 x 6001 - (Z) (RS) Diagram is shown with clockwise shaft rotation viewed from
Torque: 0.7 oz/in (5 N-cm) shaft end
Humidity: Up to 98% permissible
Speed:  6000 RPM max.
Shock: 10g (6msec)
Vibration: 5g (500 Hz)
Shaft load: Radial / Axial 10 N
Line driver output max: 50 mA per channel
Max. ppr: 5000
Inertia: 30 gm-cm2

Mounting Instructions
Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.

Dimensions

 

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk