hohner

    Hohner Automation Ltd.
Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series CSE absolute shaft encoder with parallel output (new style part number)
E   B X X - X X X X - X X X X

 
XX

Shaft Size

 XX Output Circuit

R E S O L U T I O N

K2 = 6 x 10 mm

 Extended Line Driver:

1024 = 10 bit
K4 = 10 x 20 mm 23 = Binary (cw / ccw)

4096 = 12 bit
K5 = 12 x 20 mm 26 = Gray (cw / ccw)
K8 = 8 x 20 mm Current Sink Open Collector:
29 = Binary (cw / ccw)
32 = Gray (cw / ccw)
X Connection X Connection Exit
1 = 2 m cable A = Axial
2 = 5 m cable R = Radial
J = 9516, 16 pin plug & socket
Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C Bin / Gray 16 pole Cable
-   4 ...+ 140 degrees F PS GND 1 Black
On request: -20 ... + 100 degrees C PS 12 ... 24 V 2 Red
Power supply: 11 - 24V 2-0 3 White
Current consumption: 50 mA (max.) 2-1 4 Blue
Weight: 21 oz (0.6 kg) 2-2 5 Yellow
Protection: IP 65 (IP54 available) 2-3 6 Green
Housing: Aluminum 2-4 7 Violet
Shaft: Stainless Steel 2-5 8 Brown
Bearings: 2 x 6001 ZZ C2 2-6 9 Pink
Torque: 0.4 oz/in (3 N-cm) 2-7 10 Turquoise
Shaft Seal: Nitrile Double Lip 2-8 11 Grey
Humidity: Up to 98% permissible 2-9 12 Orange
Speed: 3000 RPM max. 2-10 13 Red / Green
Shock: 10g (6msec) 2-11 14 Red / Blue
Vibration: 5g (500 Hz) For cw NC on 16 NC on Red / Black
Shaft load: Radial max 10 lbs For ccw 16 to GND Red / Black to GND
Output
Count will increment in cw direction
Mounting Instructions
To mount encoder on machine:  Option 1 is to mount with 3 screws or, option 2 is to mount using synchroflange mounting brackets.  Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.
 
Dimensions

 
Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk