|
|
|
|
Series NAMFPX incremental hollow shaft encoder up to 50 mm |
|
|
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
|
Please call +44 1978 363 888 in Europe or 1 800 295 5693 in North America or email us for pricing & delivery |
| Technical Data | Connection Options | ||||
| Operating temp: | - 20 ...+ 60 degrees C | Cable 2 meters | Connector | ||
| - 4 ...+ 140 degrees F | + Loop A # 1 | 1 (White, for 2xAB) | Any type of connector with more than 4 pins and an IP rating of 66 can be used, pin allocations will determined by end customer. More than one connector is possible as well. | ||
| Max frequency: | 5 kHz | - Loop A # 1 | 2 (Blue, for 2xAB) | ||
| Weight: | 53 oz (1.5 kg) | + Loop B # 1 | 3 (Yellow, for 2xAB) | ||
| Protection: | IP 66M, NEMA 4 | - Loop B # 1 | 4 (Green, for 2xAB) | ||
| Housing: | Aluminum | + Loop O # 1 | 5 | ||
| Shaft: | Stainless Steel | - Loop O # 1 | 6 | ||
| Bearings: | 2 x 61811 ZZ | Optional | |||
| Torque: | 0.8 oz/in (6 N-cm) | + Loop A # 2 | Violet, for 2xAB | ||
| Shaft load: | Supports its own weight | - Loop A # 2 | Orange, for 2xAB | ||
| Humidity: | Up to 98% permissible | + Loop B # 2 | Pink, for 2xAB | ||
| Speed: | Resolution dependant | - Loop B # 2 | Brown, for 2xAB | ||
| Max. ppr | 512 | ||||
| Output for Channels A&B and O | Output for 2 x A&B Channels (italic green above) | ||||
 Diagram is shown clockwise |
 Diagram is shown clockwise |
||||
| Certifications |
|
Best suited to work with the following isolators: (can be purchased from us as well) Isolator Data Sheet [MTL5015] - DIN rail mounting - 93£ Isolator Data Sheet [MTL4013] - Backplane mounting - 95£ |
| IP 66M |
| SIRA Project Number 52 X 5980 |
| II 1G EEx ia II C T4 and/or I M1 EEx ia I |
| SIRA 00 ATEX 2085 [Certificate, Variations 1, 2, 3] PDF file |
| UL E216028 [Certificate] PDF file |
| Mounting Instructions |
| Clamp encoder to
shaft and use torque arm to prevent rotation. Hook up the encoder
with the connection as described. Make sure power supply meets
specifications
|
| Dimensions |
|
|
| Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 |
| Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
| Wrexham LL13 8UG | E-mail: uksales@hohner.com |
| United Kingdom | Web: www.hohneronline.co.uk |
