|
|
|
Series 32 submersible incremental shaft encoder |
 |
3 | 2 | 1 | 2 | - | 0 | 1 | X | X | - | X | X | X | X | |||||||||||
| Shaft Size |
Connection |
|
Resolution - ppr |
||||||||||||||||||||||
| 12 = 12 mm | 03 = 2 m (6 ft) cable | ||||||||||||||||||||||||
| 05 = 5 m (15 ft) cable | |||||||||||||||||||||||||
| 12 = 12 m (36 ft) cable | |||||||||||||||||||||||||
| 68 = 68 m (200 ft) cable | |||||||||||||||||||||||||
| Standard 5 - 24 Volts Extended Line Driver PS | |||||||||||||||||||||||||
| Standard ABO & ABO inv output | |||||||||||||||||||||||||
| Submersible to 5 bar | |||||||||||||||||||||||||
| Burrgmann seal MG1 / 12-G6 | |||||||||||||||||||||||||
|
|
|||||||||||||||||||||||||
|
Please call +44 1978 363 888 in Europe or 1 800 295 5693 in North America or email us for pricing & delivery |
| Technical Data | Connection Options | |||
| Operating temp: | + 00 ...+ 60 degrees C | Cable | ||
| + 32 ...+ 140 degrees F | PS GND | Black | ||
| PS 5 ... 24 V | Red | |||
| Line driver output: | 50 mA / channel max | Output A | White | |
| Current consumption: | 80 mA (max.) | Output B | Blue | |
| Power supply: | 5 - 24V | Output O | Yellow | |
| Weight: | 70.5 oz (2.0 kg) | Output A inv | Green | |
| Housing: | Stainless Steel | Output B inv | Violet | |
| Shaft: | Stainless Steel | Output O inv | Brown | |
| Bearings: | 2 x 6001 ZZ | |||
| Torque: | 0.4 oz/in (3 N-cm) | Output | ||
| Humidity: | Up to 98% permissible | A is 90 degrees before B in clockwise direction | ||
| Speed: | 3000 RPM max. |
 |
||
| Shaft load: | Radial / Axial 10 N | |||
| Max ppr: | 5000 ppr | |||
| Pressure: Series 32 | 2.5 bar - IP 66 / 68 | |||
| Certifications |
| To use the encoder is a hazardous area, a safety barrier has to be used. Our six channel barrier series AB was designed to work with our encoders. Data Sheet |
| IP 66M / X8 [Certificate] PDF File |
| SIRA - 51D9535-A |
| IM1 EEx (ia) I |
| II1G EEx (ia) IIB T4 [Certificate] PDF file |
| SIRA 02ATEX2317X |
| UL E216028 [Certificate] PDF file |
| Mounting Instructions |
| To mount
encoder on machine: Option 1 is to mount with three screws, option 2
is to use synchroflange mounting brackets. Hook up the encoder with the connections as described. Make sure
power supply meets specifications. Attach encoder to mounting
bracket as shown. Attach shaft using a flexible coupling.
|
| Dimensions |
|
|
| Hohner Automation Ltd. | Tel: +44 (0) 1978 363-888 |
| Whitegate Industrial Estate | Fax: +44 (0) 1978 364-586 |
| Wrexham LL13 8UG | E-mail: uksales@hohner.com |
| United Kingdom | Web: www.hohneronline.co.uk |
