Series 14 incremental hollow shaft encoder - 4 ... 20 mA output

1

 

4

   X X - 0 3 X   R - 0 X X X
  Shaft

Connections

Resolution - ppr

12 = 12 mm

   1 = 2m cable
14 = 14 mm   F = 4 pin plug
20 = 20 mm   3 = 10m cable
25 = 25 mm    
30 = 30 mm    
40 = 40 mm    

B1 = 1 "

    

Price: From £305.00, £12.00 extra for 10 m of cable

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C 3 + S Cable
-   4 ...+ 140 degrees F + Loop A 1 + Loop A Red
Power Supply: 24 Volts  - Loop A 2  - Loop A Black
Max frequency: 5 kHz + Loop B 3 + Loop B White
Weight: 21 oz (0.6 kg)  - Loop B scn  - Loop B Green
Protection: IP 64S NEMA 3
Housing: Die Cast Zinc Alloy
Shaft: Aluminum
Bearings: 2 x 6810 ZZ C2
Torque: 0.7 oz/in (5 N-cm) Output
Shaft load: Supports its own weight B is phased 90 degrees in front of A in cw direction
Humidity: Up to 98% permissible
Speed:  3000 RPM max.
Max. ppr 512 ppr
 
 
 
Certifications

Best suited to work with the following isolators: (can be purchased from us as well)

Isolator Data Sheet [MTL5042] - DIN rail mounting - 131£
IP 64S
SIRA Project Number 52 X 5980
II 1G EEx ia II C T4  and/or  I M1 EEx ia I
SIRA 00 ATEX 2126X  [Certificate, Page 1, 2]  PDF file
UL E216028  [Certificate]  PDF file
 
Mounting Instructions
Mount fixture to the machine with three screws and three washers, M6 or 1/4".  Slide the encoder onto the shaft.  With the setscrews, tighten the hollow shaft encoder onto the shaft with a minimum clearance of 1/16" between fixture and encoder.  This assembly allows the shaft to float and increases the lifetime of the bearings.  Connect the encoder as per wiring specifications. Make sure power supply is within the proper voltage and current rating.  Encoder can be mounted with the setscrew on the machine side or on the opposite side for either CW or CCW.  See datasheet for CW and CCW directions of the outputs.

Technical data for mount:  1/8" stainless steel wire
 
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk