Series 08 incremental stainless steel encoder / DIN 19234

(Ex ia IIC, IECEx certified)

0   8 X X - 0 2 X X - X X X X - C

Shaft Size

 | | Resolution - ppr
Hollow Shaft | Housing Material
10 = 10 mm | S = Stainless Steel
12 = 12 mm | M = Blue Anodized Aluminum
Solid Shaft Connection
K4 = 10 x 20 mm 1 = 2m cable
2 = 5m cable
 
Ex ia IIC T4 and Ex ia I (IECEx SIR 06.0061)
 

For ATEX and UL certificates as well, please add an 'A' and or 'U' after the 'C' at the end of the part number.  The above part number will have only IECEx.  Price stays the same.

Price: From 300£

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C 3 + S Cable
-   4 ...+ 140 degrees F + Loop A 1 + Loop A Red
Power Supply: 24 Volts  - Loop A 2  - Loop A Black
Max frequency: 5 kHz + Loop B 3 + Loop B White
Weight: 23 oz (0.75 kg)  - Loop B scn  - Loop B Green
Protection: IP 67M
Housing: Stainless Steel, Al
Shaft: Stainless Steel
Bearings: 3 x 6803 ZZ C2
Torque: 0.7 oz/in (5 N-cm) Output
Shaft load: Supports its own weight B is phased 90 degrees in front of A in cw direction
Humidity: Up to 98% permissible
Max. ppr 512 ppr
Speed: 

Limited by frequency response of barrier:

Slower for higher resolution.  Typical is about 2000rpm for 100ppr
 
 
 
Certifications

Best suited to work with the following isolators: (can be purchased from us as well)

Isolator Data Sheet [MTL5015] - DIN rail mounting - 93£

Isolator Data Sheet [MTL4013] - Backplane mounting - 95£
IP 66/X7
Ex ia IIC T4 and Ex ia I (IECEx SIR 06.0061)
 
Mounting Instructions
Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.
Dimensions

Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk