hohner

    Hohner Automation Ltd.


Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series SUBXWD absolute parallel 1000m submersible solid shaft encoder


Stainless Steel SUBSWD (72mm ) shown

S

U

B

X

W

D

- K1 -

XX

X   X - X X X X

 

|

 

 

 

|___| |  

|

  Resolution
Encoder Size   | |   | 1024 = 10 bit
S = 72mm   | |   | 4096 = 12 bit
L = 90mm   | |   |  
  | |   |  
Output  ------     |   |  
23 = Binary Line Driver |

 

|  
  26 = Gray Line Driver |   |  
29 = Binary Cur. Sink Open Coll. |   |  
32 = Gray Cur. Sink Open Coll. |   |  
Connection  -------------     |  
*2 = 5m direct cable       |  
*3 = 10m direct cable       |  
*5 = 20m direct cable       |  
P = MacArtney 16 pin     Exit
MCBH16M Connector   T = Radial Stainless Steel
Connector Data Sheet   C = Axial Stainless Steel
Cable Data Sheet   *Direct cable is only suitable
For cable attached to female mating connector, specify the length of cable to be attached to the mating connector side on a separate line on the PO   for 25m depth
 
 
 
 

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C MacArtney 16 pin Direct Cable
-   4 ...+ 140 degrees F PS GND 1
Input Voltage: 24 V PS 24 V 2
Weight: 1 Kg to 6Kg 2-0 3
Protection: IP 68M 2-1 4
Housing: St. Steel 2-2 5
Shaft: Stainless Steel 2-3 6
Bearings: 2 x 6807 ZZ 2-4 7
Torque: 0.8 oz/in (6 N-cm) 2-5 8
Shaft load: Supports its own weight 2-6 9
Humidity: Underwater 2-7 10
Speed:  600 RPM 2-8 11
Output: Binary or Grey Parallel 2-9 12 Pin 15 is used for
2-10 13 CW / CCW
2-11 14 Selection
Output
Diagram is shown with clockwise shaft rotation viewed from 
shaft end

Certifications
IP68M 1000m [Certificate]
 
Mounting Instructions
Clamp encoder to shaft and use torque arm to prevent rotation.  Hook up the encoder with the connection as described.  Make sure power supply meets specifications

Dimensions of the 90 mm diameter version (Large)

Dimensions of the 72 mm diameter version (Small)

 


Hohner Automation Ltd. Tel: +44 (0) 1978 363-888
Whitegate Industrial Estate Fax: +44 (0) 1978 364-586
Wrexham LL13 8UG E-mail: uksales@hohner.com
United Kingdom Web: www.hohneronline.co.uk