Series SUBXWD absolute 1000m (1km) submersible solid shaft encoder

S

U

B

X

W

D

 - X X - 33 X   X - A 0 1 2
 

|

 

|___|

 

 |   |   Resolution
Encoder Size Shaft Size   |   |  
S = 72mm Ø K1 = 12 x 25   |   |  
L = 90mm Ø K5 = 12 x 20   |   |  
    |   |  
Connection  -------------      |  
M = MacArtney 8 pin    

Exit
MCBH8MSS Connector    T = Radial Stainless Steel
Connector Data Sheet   C = Axial Stainless Steel
Cable Data Sheet    
For cable output, specify the length of cable to be attached to the mating connector side on a separate line on the PO    
   
 
 
 
 

Please call +44 1978 363 888 in Europe or 1 800 295 5693 in North America or email us for pricing & delivery
Technical Data Encoder Description
Operating temp: - 20 ...+   60 degree C The 12 bit absolute encoder has a 12 bit binary value
- 04 ...+ 140 degree F
On request - 20 .. +100 degree C
Current consumption: 80 mA (max.)
6 ft drop cable Device Configuration
Weight:    1.5 to 2.5 Kg ODVA profile: Resolver
Protection: IP 66 / X7 Explicit Peer to Peer Messaging Not supported
Housing: Stainless Steel I / O Peer to Peer Messaging Not supported
Shaft: Stainless Steel Configuration consistency value Not supported
Bearings: 2 x 6001 ZZ C2 Faulted node recovery Not supported
Torque: 0.4 oz/in (3 N-cm) Baud rate Supported
Humidity: Up to 98% permissible Master / Scanner Not supported
Speed:  3000 RPM max. I / O Slave messaging Not supported
Directions Numbers rising in cw direction Bit strobe Not supported
Poll  Supported
Standards Cyclic Not supported
UL file number  -  198887 Change of state Not supported
European standard EN 50324 EDS
Tested by University of Michigan Vendor ID 34
Devicetype  9
Product code 1
Product name MTDR
Catalog 12 bit absolute encoder
Expected response data 4 bytes
Maximum value 12 bit
Mounting Instructions
Clamp encoder to shaft and use torque arm to prevent rotation.  Hook up the encoder with the connection as described.  Make sure power supply meets specifications
Dimensions of the 90 mm diameter version (Large)

Dimensions of the 72 mm diameter version (Small)

 
Hohner Corp. Tel: (905) 563 4924
5536 Regional Road 81 Fax: (905) 563 7209
Beamsville, Ontario E-mail: hohner@hohner.com
Canada L0R 1B3 Web: www.encoderonline.com