Series CS3 singleturn analog encoder with 4 ... 20 mA output
C   S 3   X - 3   4   X   X - X   X   X   X
Shaft   Connection

Resolution - turns
2 = 12 mm 07 = 4 pin Radial 0360 = 360 degrees
1 = 3/8" 17 = 4 pin Axial 0180 = 180 degrees
05 = 6 ft cable Radial 0090 = 90 degrees
 

15 = 6 ft cable Axial

  

Call 1 800 295 5693 or email us for pricing and other information.

To purchase online, please request an "e-quote"

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C 3 + S connector Cable
-   4 ...+ 140 degrees F PS GND 1 PS GND Black
Higher Temperature: Please consult PS 24 V 2 PS 24 V Red
Output 3 Output Blue
Current consumption: 100 mA (max.) Shield
Power supply: 24V  
Weight:    11 oz (0.3 kg) Output
Protection: IP 54, 65 or 66

Housing: Aluminum
Shaft: Stainless Steel
Bearings: 2 x 6001 ZZ C2
Torque: 0.4 oz/in (3 N-cm)
Humidity: Up to 98% permissible
Speed:  6000 RPM max.
Shock: 10g (6msec)
Vibration: 5g (500 Hz)
Shaft load: Radial / Axial max 10 lbs
Line driver output max: 50 mA per channel
Inertia: 30gm-cm2
 
Mounting Instructions
Hook up the encoder with the connections as described.  Make sure power supply meets specifications.  Attach encoder to mounting bracket as shown.  Attach shaft using a flexible coupling.
 
Dimensions