Series 85 analog encoder with 4 ... 20 mA output
8   5   X   X - 3   4   X   X - 0   X   X   X
  Shaft   Connection

Resolution - turns
02 = 3/8" 07 = 4 pin 0360 = 360 degrees
03 = 1/2" 05 = 6 ft cable 0180 = 180 degrees
05 = 5/8" with 0090 = 90 degrees
.keyway 3/16"

 

  
.10 = 10 mm
12 = 12 mm
with 4x4 keyway
15 = 15 mm
20 = 20 mm

Call 1 800 295 5693 or email us for pricing and other information.

To purchase online, please request an "e-quote"

Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C 3 + S connector Cable
-   4 ...+ 140 degrees F PS GND 1 PS GND Black
Higher Temperature: Please consult PS 24 V 2 PS 24 V Red
Output 3 Output Blue
Current consumption: 100 mA (max.) Shield
Power supply: 24V  
Weight:    11 oz (0.3 kg) Output
Protection: IP 54

Housing: Die cast zinc alloy
Shaft: Aluminum
Bearings: 2 x 6005 ZZ
Torque: 0.4 oz/in (3 N-cm)
Humidity: Up to 98% permissible
Speed:  3000 RPM max.
Shock: 10g (6msec)
Vibration: 5g (500 Hz)
Shaft load: Radial / Axial max 10 lbs
Line driver output max: 50 mA per channel
Inertia: 30gm-cm2
 
Mounting Instructions
Slide encoder onto shaft.  Use torque arm to prevent rotation.  Hook up the encoder with the connections as described.  Make sure power supply meets specifications.
Dimensions