hohner

    Hohner Corporation


Home Email Distributors Terms About Us Accessories Download 3D AutoCAD

Series 14 incremental hollow shaft encoder up to 1 - 5 / 8"


1   4   X   X - 0   1   X   X - X   X   X   X

Shaft Size

 

Connection

   

Resolution - ppr
03 = 1/2" 00 = 9 pole D , output ABO & ABO inv
04 = 3/4" 08 = 12 pin ABO & ABO inv
05 = 5/8"  10 = 7 pin AB & AB inv
07 = 1"  31 = 10 pin military ABO & ABO inv
09 = 1 - 1/2"  
15 = 1 - 5/8"  
24 = 25 mm    
25 = 1 - 1/4"    
27 = 7/8"  
42 = 20 mm  

Select your options below and buy online, easily and securely, with PayPal (from $350)

 Shaft              Connections                                  Resolution

 


Technical Data Connection Options
Operating temp: - 20 ...+   60 degrees C 9 pole Cable 7 pin 10 pin 12 pin
-   4 ...+ 140 degrees F PS GND 1 Black F F 1
Higher Temperature: Please consult PS 5 ... 24 V 2 Blue D D 2
Max frequency: 100 kHz Output A 3 Brown A A 3
Current consumption: 50 mA (max.) Output B 4 Beige B B 4
Power supply: 5 - 24V Output O 5 Pink C C 5
Weight:    39 oz (1.1 kg) Output A inv 6 Yellow G H 6
Protection: IP 64 Output B inv 7 Green E I 7
Housing: Aluminum Output O inv 8 Violet J 8
Shaft: Aluminum
Bearings: 2 x 6810 ZZ C2 Output
Torque: 0.4 oz/in (3 N-cm) A is 90 degrees before B in clockwise direction
Humidity: Up to 98% permissible

Speed:  3000 RPM max.
Shock: 10g (6msec)
Vibration: 5g (500 Hz)
Shaft load: Supports its own weight
Line driver output max: 50 mA per channel
Max. ppr 2048
   
    
Mounting Instructions
Mount fixture to the machine with three screws and three washers, M6 or 1/4".  Slide the encoder onto the shaft.  With the setscrews, tighten the hollow shaft encoder onto the shaft with a minimum clearance of 1/16" between fixture and encoder.  This assembly allows the shaft to float and increases the lifetime of the bearings.
Connect the encoder as per wiring specifications. Make sure power supply is within the proper voltage and current rating.  Encoder can be mounted with the setscrew on the machine side or on the opposite side for either CW or CCW.  See datasheet for CW and CCW directions of the outputs.

Technical data for mount:  1/8" stainless steel wire
 

Dimensions


Hohner Corp. Tel: (905) 563 4924
5536 Regional Road 81 Fax: (905) 563 7209
Beamsville, Ontario E-mail: hohner@hohner.com
Canada L0R 1B3 Web: www.encoderonline.com