|
|
|
|
Series 08 hollow shaft encoder up to 12 mm |
 |
0 | 8 | X | X | - | 0 | 1 | X | X | - | X | X | X | X | |||||||||
|
Shaft Size |
|
|____| |
Resolution |
||||||||||||||||||||
| 02 = 3/8" | | | ||||||||||||||||||||||
| 10 = 10 mm | Connection Options | ||||||||||||||||||||||
|
12 = 12 mm |
03 = 6 ft cable, all channels | ||||||||||||||||||||||
|
Support: US 1 800 295 5693 | Next Day Shipment Available |
| Technical Data | Technical Data (Incremental) | |||
| Operating temp: | - 20 ...+ 60 degrees C |
Max ppr: |
2048 | |
| - 4 ...+ 140 degrees F | Max frequency: | 100 kHz | ||
| Higher Temperature: | Please consult | Max current cons: | 40 mA | |
| Max frequency: | 100 kHz | Power supply: | 5 ... 24 Volts | |
| Power: | 5...24 volts | Line driver output max: | 50 mA | |
| Connection: | 9 pole D connector | |||
| Weight: | 15 oz (0.4 kg) | Connection: | ||
| Protection: | IP 67M | 6 ft cable with 9 pole D male adaptor | ||
| Housing: | Stainless Steel | 1 = GND |  |
|
| Shaft: | Stainless Steel | 2 = +5 ... 24 Volts | ||
| Bearings: | 3 x 6803 ZZ C2 | 3 = Output A | ||
| Torque: | 0.4 oz/in (3 N-cm) | 4 = Output B | ||
| Humidity: | Up to 98% permissible | 5 = Output Ref | ||
| Speed: | 3000 RPM max. | 6 = Output A inv | ||
| Shock: | 10g (6msec) |
7 = Output B inv |
||
| Vibration: | 5g (500 Hz) | 8 = Output Ref inv | ||
| Shaft load: | Supports its own weight | 9 = NC | ||
| Mounting Instructions |
| Slide encoder onto shaft. Use torque arm to prevent rotation. Hook up the encoder with the connections as described. Make sure power supply meets specifications. |
| Dimensions |
|
|
| Hohner Corp. | Tel: (905) 563 4924 |
| 5536 Regional Road 81 | Fax: (905) 563 7209 |
| Beamsville, Ontario | E-mail: hohner@hohner.com |
| Canada L0R 1B3 | Web: www.encoderonline.com |
