hohner |
Hohner Corporation |
Home | Distributors | Terms | About Us | Accessories | Download 3D AutoCAD |
Series 90 absolute parallel encoder |
![]() |
9 | 0 | X | X | - | 2 | 0 | X | X | - | 0 | 0 | X | X | |||||||||||
Shaft Size |
|
|___| |
|
Resolution - bits |
|||||||||||||||||||||
11 = 2" -keyway 3/8" | | | 1024 = 10 bit | |||||||||||||||||||||||
18 = 50 mm -keyway 8x8 | | | 8192 = 13 bit | |||||||||||||||||||||||
Output Code | |||||||||||||||||||||||||
20 = binary, 16 pin | |||||||||||||||||||||||||
24 = gray, 16 pin | |||||||||||||||||||||||||
29 = gray, 6 ft cable | |||||||||||||||||||||||||
30 = binary, 6 ft cable | |||||||||||||||||||||||||
|
Technical Data | Connection Options | ||||
Operating temp: | - 20 ...+ 60 degrees C | Bin / Gray | 16 / 21 pole | Cable | |
- 4 ...+ 140 degrees F | PS GND | 1 | Black | ||
Higher Temperature: | Please consult | PS 12 ... 24 V | 2 | Red | |
Power supply: | 12 - 24V | 2-0 | 3 | White | |
Current consumption: | 100 mA (max.) | 2-1 | 4 | Blue | |
Line driver output max: | 50 mA per channel | 2-2 | 5 | Yellow | |
Weight: | 70.4 oz (2.0 Kg) | 2-3 | 6 | Green | |
Protection: | IP 54 | 2-4 | 7 | Violet | |
Housing: | Die cast zinc alloy | 2-5 | 8 | Brown | |
Shaft: | Aluminum | 2-6 | 9 | Pink | |
Bearings: | 2 x 6011 ZZ | 2-7 | 10 | Turquoise | |
Torque: | 0.4 oz/in (3 N-cm) | 2-8 | 11 | Grey | |
Humidity: | Up to 98% permissible | 2-9 | 12 | Orange | |
Speed: | 3000 RPM max. | 2-10 | 13 | Green / Red | |
Shock: | 10g (6msec) | 2-11 | 14 | Red / Blue | |
Vibration: | 5g (500 Hz) | 2-12 | 15 | Yellow / Red | |
Shaft load: | Supports its own weight | cw = N / C to pin 16 | Red / Black | ||
ccw = pin 16 to GND | |||||
Output | |||||
Count will increment in cw direction | |||||
![]() |
Mounting Instructions |
Mount fixture to the
encoder with two self-tapping M6 x 10 screws and two No. 6.2 washers.
Slide the encoder onto the shaft. With two 1/2-13 screws, tighten the
encoder fixture to the motor-frame or machine. With the setscrews,
tighten the hollow shaft encoder onto the shaft with a minimum clearance of
1/16" between fixture and encoder by bending the fixture arms as required.
Connect the encoder as per wiring specifications.
|
Dimensions |
|
Hohner Corp. | Tel: (905) 563 4924 |
5536 Regional Road 81 | Fax: (905) 563 7209 |
Beamsville, Ontario | E-mail: hohner@hohner.com |
Canada L0R 1B3 | Web: www.encoderonline.com |